ماژول IR RECEIVER MODULE

5 ولت DC

0.4 تا 1.5 میلی آمپر

38 کیلوهرتز

100 تا 150 هرتز

بالاتر از -18 دسی‌بل

18 متر

90 درجه

دیجیتال با مقادیر 0 و 1 برای نمایش سیگنال مادون قرمز

سه پایه (VCC، GND، و OUT) با استاندارد 2.54 میلی‌متر

15*18 میلی متر

2 گرم

It is connected to the positive power supply (+5V DC) and provides the working voltage of the module.

It is connected to the negative power supply (GND or zero volt DC) and is the negative ground.

This is the digital output pin of the module that is connected to the microcontroller or board. The state of this pin changes to 1 when an infrared signal is received and to 0 when no signal is received.

5 volts DC

0.4 to 1.5 mA

38 kHz

90°

18m

100 to 150 Hz

above -18 dB

digital with values 0 and 1 to display the infrared signal

three pins (VCC, GND, and OUT) with 2.54 mm standard

15 x 18 mm

2 grams