1. Input voltage
DC5-32V, recommend the use of a voltage above 10V
2. Output voltage
DC1V-30V continuously adjustable; default 12V shipments;
3. Output Current
10A (MAX) long 7A within the default 4A delivery;
4. Output power
long-term 80W, peak 130W, exceeding 80W please enhance heat dissipation;
5. Output ripple
50mV (12V switch 12V, 5A measured);
6. Enter the reverse polarity protection
None, if necessary, please Schottky diode in series with the input;
7. Output anti-intrusion
None, if necessary charge, at the output Schottky diode in series;
8. Operating temperature range
-45 ~ + 85 ° C;
9. Size
77.6 * 46.5 * 15mm (containing aluminum underside of the heat);
10. Short circuit protection
Yes;
Battery voltage protection adjustment method
(10V to 12V lead-acid battery undervoltage protection settings, turn off the output, for example)
Note
If used for constant pressure device, you only need to set the maximum output current.
2. output voltage adjustment method
connect the power input (voltage greater than the undervoltage protection value), the red light is not bright, blue lights, output connected multimeter, adjust the output voltage potentiometer ( clockwise to increase, decrease counter-clockwise), until the desired voltage;
3. Output current adjustment method
(to 12V input 12V lead-acid rechargeable battery, the charging current 5A, for example)