DAPS-3840-090-R-F16-T6 (553189) Semi-rotary drive
گزارشفروشندهها
- خرید اینترنتی۱
- خرید حضوری۱
با انتخاب شهر، قیمت فروشگاههای آنلاین کل ایران رو با ارزانترین حضوریهای اطرافت مقایسه کن!
لیست تغییرات قیمت
مشخصات محصول
مشخصات کلی
Position drive dimensions
3840
Flange drilling screen
F16
Swivel angle [deg]
90
Adjustable range end position at 0° [deg]
-5 to 5
Shaft connection Depth [mm]
49,0
Standard connection to fitting
ISO 5211
Dampening
No dampening
installation position
arbitrary
Principle of operation
double acting
Construction set up
Joch kinematics
Position detection
without
Closing direction
Right closing
Valve connection corresponds to standard
VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)
Product can be used in SRP/CS up to SIL 2 Low Demand
Operating pressure [bar]
3 to 8.4
Nominal operating pressure [bar]
5,6
ATEX gas category
II 2G
Ex ignition protection type gas
Ex h IIC T6...T3 Gb X
ATEX dust category
II 2D
Ex ignition protection type dust
Ex h IIIC T85°C...T200°C Db X
Ex ambient temperature
-50°C <= Ta <= +60°C
ambient temperature [°C]
-50 to 60
Operating medium
Compressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control medium
Oiled operation possible (required in further operations)
CE certificate (see declaration of conformity)
to EU EX protection directive (ATEX)
Corrosion resistant class KBK
3 - severe corrosion stress
Rotary torque for nominal operating pressure and 0° pivot angle [Nm]
3.840,0
Rotary torque for nominal operating pressure and 50° pivot angle [Nm]
1.920,0
Rotary torque for nominal operating pressure and 90° pivot angle [Nm]
2.880,0
Information about torque
The operating torque of the actuator may not be higher than the maximum permitted torque listed in ISO 5211, related to the size of the fastening flange and the coupling.
Air consumption a 6 bar per cycle 0°-90°-0° [LTR]
170,10
Product weight [g]
49.000
Shaft connection
V46
Pneumatic connection
G3/8
Material information
LABS containing materials included
Cover material
Aluminium wrought alloy
Seals material
FVMQ
Housing material
Aluminium wrought alloy
Screws material
High-alloyed steel
Shaft material
High-alloyed steel
Material number shaft
1.4305
Adjustable range end position at 90° [deg]
85 to 95
Weight
49.000 g / Pcs
GTIN
4052568195670
Customs duty number
84123900
RoHS compliant
Yes
Manufacturer
Festo
Document
Group data sheet: DAPS (english), ,, Data sheet