Image Sensor:
1/3" Progressive Scan CMOS
Min. Illumination:
0.01Lux @ (F1.2, AGC ON), 0 Lux with IR, 0.028Lux @ (F2.0, AGC ON) ,0 Lux with IR
Shutter time:
1/3 s to 1/10,000 s
Lens:
2.8mm, 4mm, 6mm @ F2.0
Day& Night:
IR cut filter with auto switch
Wide Dynamic Range:
Digital WDR
Video Compression:
H.264/ MJPEG
Video bit rate:
256Kbps~16Mbps
Max. Image Resolution:
2560×1920
Frame Rate:
50Hz: 20fps (2560×1920), 25fps (2048x1536), 25fps(1920×1080), 25fps(1280×720) 60Hz: 20fps (2560×1920), 30fps (2048x1536), 30fps(1920×1080), 30fps(1280×720)
Image Settings:
Saturation, brightness, contrast adjustable through client software or web browser
Network Storage:
NAS (Support NFS,SMB/CIFS), ANR
Alarm Trigger:
Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception
Protocols:
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
NOTE::
* “-S” series support 1-ch audio I/O and 1-ch alarm I/O
System Compatibility:
ONVIF, PSIA, CGI, ISAPI
Communication Interface:
1 RJ45 10M / 100M Ethernet interface
Power Supply:
12 VDC ± 10%, PoE (802.3af)
Power Consumption:
Max. 5 W
IR Range:
Approx. 10 meters
Dimensions:
Φ119.93×87.08 mm
H.264 code profile:
Main Profile
Operating Conditions:
-10 °C – 40 °C (14 °F – 104 °F) Humidity 95% or less (non-condensing)
Digital noise reduction:
3D DNR
Adjustment Range:
Pan:0° - 355°, Tilt: 0° - 75°, Rotation: 0-355°
alarm
1x alarm I/O *only for –S models
On-board storage:
Built-in Micro SD/SDHC/SDXC slot, up to 128 GB